What would you like to do?
(Click an option to see directions.)
Need to tell us about a problem in a room or send us a message?
Go to the Room Comments Page to easily let us know!
(For immediate help, please dial 8-8888 from the room phone.)
Turning on the Projector
1 - Press the Power button on the top-right hand corner of the panel.
2 - The screen will say, Would you like to use the LCD Projector?; tap YES.
3 - The projector will turn on and the screen will lower. It will take a full minute for the image to show up on the screen.
Turning the System Off
1 - Tap the Power Off button at the top of the screen.
2 - The projector will turn off and the screen will rise. It will take 90 seconds for the shutdown procedure to finish.
Selecting/Changing the Source
1 - Tap the Sources button on the left side of the screen.
2 - If you want to display the computer screen, tap on the Installed PC button.
3 - If you want to play a VHS movie, tap the VHS Player button.
Using the VCR
1 - Insert your VHS tape into the VCR
2 - On the touch panel, tap the Sources button
3 - Tap the button that says VCR
4 - Use the controls on the VCR screen to control the tape.
Playing a DVD
(The simplest way to play a DVD is to use the DVD player that is in the computer.)
1 - Open the DVD player on the computer and insert the DVD, then close the DVD drawer.
2 - A screen may appear asking you what you would like to do with the disk, choose the option that says Play DVD using InterVideo WinDVD
3 - If this screen does not appear, click the icon 
on the desktop that says DVD Player and the DVD playing software will start.
Adjusting the Volume
1 - Tap the Volume Control button on the left side of the screen to access the volume control screen.
2 - To adjust the volume from the computer or DVD player, use the controls on the right side of the screen under the word Program. Use up or down to increase or decrease the volume and the Mute button to silence the system.
3 - To adjust the microphone volume use the controls on the left side of this screen under the word Microphone.
4 - Tap the EXIT button to leave this screen.
Connecting the Laptop
1 - Plug the video cable and sound cable from the podium into the appropriate slots on your laptop. (Important: If you are using a Mac, you may need an adaptor to plug into this cable. Contact Classroom Support if you have questions about this.
2 - Tap the sources button on the left side of the screen.
3 - Tap the AUX button to choose the laptop as the audio/video source. The system will display what is on your laptop through the projector and will play sounds from your laptop through the room speakers.
If nothing shows up on screen after choosing the source be sure that your laptop is set to use a second monitor. This is normally done on a pc by pressing the function key and the F4 key at the same time. Contact classroom support if you need further help with this.
The Classroom Technology Support team is here to serve you.
Back to Classlist